EVO: Carburetor, Intake Manifold & Exhaust - Sub-01B

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

[[:techtalk:menu|{{  :techtalk:gototechnicalmenu.jpg|}}]]
====== EVO: Carburetor, Intake Manifold & Exhaust - Sub-01B ======

====== Keihin CV Carb Identification ======

All H-D CV carburetors have a code on one side, above the float bowl. This code is a two part code: ((HD TSB #M-1035 dated 10-8-1993)) \\
  * The first four characters is the "Set Mark" for internal HD use.
  * The next letter is the revision code.
  * The last three characters are the date code. \\

Carburetors with the part number 27038-92 and 27039-92 and the "B" revision code do not have the rounded float (press fit) pedestal for the float pin. \\
Carburetors with those part numbers have the new pedestal only if they have a "C" or higher revision letter. \\
All other carburetors with a "B" or higher revision letter have the new pedestal. \\


\\

\\

[[:techtalk:menu|{{:techtalk:gototechnicalmenu.jpg|}}]]

Trace: • MiscRes: Terminology • IH: Suspension - Sub-03D • REF: Tools - 156 • REF: Service Procedures 9U • W E L C O M E !

Navigation

Search

Toolbox