Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
techtalk:evo:engmech01 [2025/07/28 21:43] – [#2 Cam - Cover Seal (86-03)] hippysmacktechtalk:evo:engmech01 [2025/07/28 22:51] (current) – [Ignition Sensor Seal (1986-2003)] hippysmack
Line 136: Line 136:
  
 ===== Ignition Sensor Seal (1986-2003) ===== ===== Ignition Sensor Seal (1986-2003) =====
-This is a steel shell radial shaft seal (HD# 11124) installed in the cam cover. +This is a steel shell radial shaft seal (HD# 11124) installed in the cam cover. \\ 
-It surrounds and seals #2 cam when the cover is installed. +It surrounds and seals #2 cam when the cover is installed. Also used on 1971-1985 Sportster cam covers. \\ 
-Also used on 1971-1985 model Sportster cam covers as a breaker point or ignition sensor seal. \\ +Dims per XLForum member, Fizzle: \\ 
-Other brands include James (JGI-11124), Cometic (C9355), Athena (51-A210), Custom Chrome (54-043). +OD 1.570" (39.878mm), ID 1.050" (26.67mm), W 0.248" (6.2992mm) \\
-The rubber shell HD Genuine double lip version is part number (11124-DL). +
-Other brands include James (JGI-11124-DL). +
-NOTE: SKF makes a radial shaft seal with a part number of 11124 but that IS NOT AN HD PART NUMBER. +
-SKF 11124 is an SKF part number and THAT SEAL IS TOO BIG TO FIT THE COVER. +
  
-HD seal (11124): \\ +Other brands include James (JGI-11124), Cometic (C9355), Athena (51-A210), Custom Chrome (54-043). \\ 
-See also [[techtalk:evo:engmech01f#cam_cover_seal_86-03|Removal / Installation of the #2 cam cover seal]] in the Sportsterpedia. \\+The rubber shell HD Genuine double lip version is part number (11124-DL). \\ 
 +Other brands include James (JGI-11124-DL). \\ 
 +**NOTE**: __SKF makes a radial shaft seal with a part number of 11124 but that IS NOT AN HD PART NUMBER__. \\ 
 +SKF 11124 IS TOO BIG TO FIT THE COVER and they don't show a compatible seal in their catalog for this application. \\
  
-|  This side faces out. ((photo by Hippysmack))  |  This side faces #2 cam shaft. ((photo by Hippysmack))  | +HD Seal (11124): \\ 
-|{{:techtalk:evo:engmech:AAA11124_cam_cover_seal_2_by_hippysmack.jpg?direct&300|}}|{{:techtalk:evo:engmech:AAA11124_cam_cover_seal_1_by_hippysmack.jpg?direct&300|}}|+ 
 +{{:techtalk:ih:engmech:1971-2003_nosecone_ignition_seal_11124_by_hippysmack.jpg?direct&400|}} ((photo by Hippysmack))
  
 ===== Removing / installing the pinion shaft nut ===== ===== Removing / installing the pinion shaft nut =====

Trace: