Differences

This shows you the differences between two versions of the page.

--- techtalk:evo:engmech01g [2022/03/31 20:14] – [Casting Numbers] hippysmack
+++ techtalk:evo:engmech01g [2022/04/04 14:17] (current) – [2004-E2007 Covers] hippysmack
@@ Line 22: / Line 22: @@
 -1999 Sportster cam covers: casting number (25230-98). \\
 -2003 Sportster cam covers: casting number (25230-98A). \\
-- Sportster cam covers: casting number (25230-04). \\
+-E2007 Sportster cam covers: casting number (25230-04). \\
+L2007-Up Sportster cam covers: casting number (25230-04A). \\
 ====== Date Codes ======
-===== Circle Date Code (1986-2003) =====
+===== Model Season =====
--2003 cam covers have a circle date code. \\
+When deciphering dates of parts, be sure to take the model year production season into account. \\
-The date code represents the machining date (not the year the cover was designed to be used on). \\
+{{:techtalk:miscres:hd_model_year_season_by_hippysmack.png?direct&600|}} \\
+===== Circle Date Code (1986-2006) =====
+-2006 cam covers have a circle date code (2004-up cam covers also have a machining date pin stamp). \\
+The circle date code represents the casting date (not the year the cover was designed to be used on or machined for bushes etc.) \\
 The circle date code consists of a circle cast into the inside of the cover with 12 dividers around the circle representing 12 months of the year. \\
-The last 2 numbers of the year the cover was cast appears in the middle of the circle followed by a series of blots in the divisions around the circle. \\
+The last 2 numbers of the year the cover was cast appears in the middle of the circle followed by a series of dots in dividers around the circle. \\
 You can't interpret the year in the circle to be the year model the cover was made for. \\
 For instance, you may find that a 1990 cover was actually created in 1991 or even 1993 as in the pic below. \\
+The dots in the dividers provide the month the cover was cast but the pattern for the dots is inconsistent at times. \\
+There may be a dot in top center and a dot in bottom center (2 dots total) and that could be interpreted a few different ways. \\
+Others have multiple dots starting toward the top or bottom arranged within the dividers around the circle. \\
+In general, the number of dots should follow the model season numbering system for the year. \\
+(2 dots should be May and 7 dots should be July etc.) \\
+But due to the inconsistencies of the dots, you may have to view other features for a more positive date match. \\
 L1984-1990 covers: \\
@@ Line 41: / Line 53: @@
 |{{:techtalk:ih:engmech:1985_xl-xls_cam_cover_25208-84a_by_nitrofrankie_go-fast_hd_pic4.jpg?direct&300|}}|{{:techtalk:evo:engmech:1986-1990_sportster_cam_cover_25219-86_by_deadpartsmc_pic5.jpg?direct&300|}}|{{:techtalk:evo:engmech:1986-1990_sportster_cam_cover_date_codes.jpg?direct&300|}}|
+===== Machining Dates (2004-up) =====
+-up cam covers have a several numbers pin stamped on the inside of the cover. \\
+Original location was on the rear near the oil tank breather fitting. \\
+Later covers were stamped on the inside front in the round portion behind the oil filter mount. \\
+There are 2 sets of numbers with the first being the month, day and year of machining (holes drilled, bushings installed/reamed etc.) \\
+The next set of numbers are for unknown reasons at this time. \\
+The unknown numbers may be production, control or operator numbers and possibly a mix of the same. \\
-====== 1986-1990 Cam Cover ======
+-2006 covers also have a circled date stamp that was faded out for model season 2007. \\
+As per usual, the remainder of 2006 covers were used out in the early part of the 2007 season (running change). \\
+So 2004-2006 and some 2007 covers will have both machining dates and casting dates. \\
+====== 1986-1990 Cam Covers ======
 The same HD part number (25219-86) was used for 1986-1990 cam covers. \\
 The casting number is (25222-84A) for all L1984-1990 cam covers and all have a circle date code below the casting. \\
@@ Line 52: / Line 74: @@
 {{:techtalk:evo:engmech:1986-1990_sportster_cam_cover_25219-86_by_deadpartsmc_pic5.jpg?direct&300|}} ((photo courtesy of DeadpartsMC, [[https://www.ebay.com/str/deadpartsmc|Link to Ebay Store]] )) \\
+====== 2004-Up Cam Covers ======
+There are only 4 cam cover part number changes on 2004-2016 Sportsters, and most likely beyond and not counting XR models. \\
+They are the same cover with different finishes: polished, chrome, black or gray. \\
+The XR cover is a completely different design. \\
+Figuring that there was a casting/design change in 2007, that leaves a total of 2 versions of these covers not counting surface finish or XRs. \\
+**2007 Casting number change**: \\
+The same casting design (25230-04) was used from 2004 through an early 2007 running design change to casting# (25230-04A). \\
+The casting number change has a direct correlation to the removal of casting bumps in the feed galley of the cover. \\
+Casting# (25230-04) has the casting bumps in the feed galley. Casting# (25230-04A) does not have the casting bumps in the feed galley. \\
+In 2007, the MoCo made a drastic change to the gerotor sizes in the oil pump. Both feed and scavenge gerotor sets got much taller than before. \\
+As a result, the scavenge volume increased and according to measurements, the feed side volume was slightly reduced compared to 2006-earlier design. \\
+With 2007 oil pumps having slightly less feed volume, it's possible the removal of casting bumps in the cover were to free up oil flow. \\
+[[techtalk:evo:oil03g|Click Here]] to read more on the Volume and Flow Comparison between 2006 and 2007 oil pumps in the Sportsterpedia. \\
+|  E2007 Cam Cover (casting# 25230-04) ((photo courtesy of DeadpartsMC, [[https://www.ebay.com/str/deadpartsmc|Link to Ebay Store]] ))  |
+|{{:techtalk:evo:engmech:2007e_sportster_cam_cover-_inside_by_deadpartsmc.jpg?direct&300|}}|
+===== 2004-E2007 Covers =====
+===== L2007-Up Covers =====

Trace:

Differences

Navigation

Search

Toolbox