IH: Carburetor, Intake Manifold & Exhaust - Sub-01F

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
[[:techtalk:menu|{{  :techtalk:gototechnicalmenu.jpg|}}]]
====== IH: Carburetor, Intake Manifold & Exhaust - Sub-01F ======
\\
====== Rebuilding the Tillotson Carb ======
See also in the Sportsterpedia: \\
  * [[techtalk:ih:carb01#tillotson_hd_carb_1966-1971|Tillotson Carb Basic Information]]
  * [[techtalk:ih:carb01e|Tillotson Carb Identification]]
  * [[techtalk:ih:carb01g|Tillotson Carb Functions, Adjustments, Tuning]]

Tillotson Part Numbers: (click on a pic to enlarge) \\

{{:techtalk:ih:carb:tillotson_hd_carb_part_numbers_pic1.png?direct&600|}} \\
{{:techtalk:ih:carb:tillotson_hd_carb_part_numbers_pic2.png?direct&600|}} \\
{{:techtalk:ih:carb:tillotson_hd_carb_part_numbers_pic3.png?direct&600|}} \\

====== Parts List ======
^{{techtalk:miscres:instruction_sheet_header_4.png?nolink&850|}}||||||||
|Ref \\ No.|HD \\ Part#|Description|  Tillotson Part No. per Carb  |||||
|:::|:::|:::|  HD1A  |  HD1B  |  HD1C  |  HD1D  |  HD5A  |
|1|27760-66|* Accelerator Pump Assembly|  013785  |  013785  |  013785  |  013785  |  ----  |
|2|27759-66|Accelerator Pump Lever|  012761  |  012761  |  012761  |  012761  |  012761  |
|3|2540|*Accelerator Pump Lever Screw|  06393  |  06393  |  06393  |  06393  |  06393  |
|4|7005|*Body Channel Cup Plug (2)|  06396  |  06396  |  06396  |  06396  |  06396  |
|5|--|*Body Channel Cup Plug (2)|  010588  |  010588  |  010588  |  010588  |  010588  |
|9|711|*Body Channel Welch Plug (2)|  04326  |  04326  |  04326  |  04326  |  04326  |
|10|713|*Body Channel Welch Plug|  013737  |  013737  |  013737  |  ----  |  013737  |
|11|712|*Body Channe1 We1ch Plug (Choke)|  03489  |  03489  |  03489  |  03489  |  ----  |
|12|27406-26|Choke Friction Ball|  04784  |  04784  |  04784  |  04784  |  ----  |
|13|27671-66|Choke Friction Spring|  08805  |  08805  |  08805  |  08805  |  ----  |
|16|27668-66|Choke Relief Valve|  013742  |  013742  |  013742  |  013742  |  ----  |
|17|27669-66|*Choke Relief Valve Spring|  013775  |  013775  |  013775  |  013775  |  ----  |
|19|27718-66|Choke Shaft & Lever|  013777  |  ----  |  ----  |  ----  |  ----  |
|:::|27718-67|:::|  ----  |  014296  |  014296  |  014296  |  :::  |
|21|27661-66|Choke Shaft Seal|  09484  |  09484  |  09484  |  09484  |  ----  |
|22|27673-66|Choke Shutter|  013741  |  013741  |  013741  |  013741  |  ----  |
|23|27720-61|*Choke Shutter Screw (2)|  08942  |  08942  |  08942  |  08942  |  ----  |
|24|27716-67|Choke Wire Connection|  ----  |  014294  |  014294  |  014294  |  ----  |
|25|27716-55|Choke Wire Retainer Clip|  ----  |  010392  |  010392  |  010392  |  ----  |
|26|27716-61|Choke Wire Connection Washer|  ----  |  012174  |  012174  |  012174  |  ----  |
|27|993W|Choke Wire Ret. Screw|  ----  |  012305  |  012305  |  012305  |  ----  |
|28|27806-66|Diaphragm Gasket|  013731  |  013731  |  013731  |  013731  |  ----  |
|::|27806-66R|:::|  ----  |  ----  |  ----  |  ----  |  014120  |
|29|27816-66|*Diaphragm|  013790  |  013790  |  013790  |  013790  |  ----  |
|::|27816-66R|:::|  ----  |  ----  |  ----  |  ----  |  014248  |
|30|27804-66A|Diaphragm Cover|  014871  |  014871  |  014871  |  014871  |  ---  |
|:::|27804-66R|:::|  ----  |  ----  |  ----  |  ----  |  014117  |
|31|27812-66|Diaphragm Cover Plug Screw|  013771  |  013771  |  013771  |  013771  |  ----  |





(*) Indicates contents of Repair Parts Kit
====== Cleaning ======
  * The general appearance of the inside of the carb is not necessarily a good indication of its condition. \\ It can look spotless and have clogged jets, or look cruddy and have clear jets.
  * It's good to clean each individual part rather than soak or boil the whole carb in carb cleaner. \\ But either way is good. Do not allow any solvents to contact any rubber parts (tip of needle, O-ring seal for bowl).
  * Make sure to take everything apart, jets, needle, accel pump, all rubber components especially.
  * Examine all parts for excessive wear, damage, distortion, etc.
  * Cleaning solutions/sprays vary based upon your location, needs, budget, preferences and quality. \\ Dismantle the carb down to the body before soaking. You will be surprised at all the dirt in the bottom of the soaking container. \\ Here are some helpful ideas: 
     * An overnight soak in a solution of Pinesol and water followed up with a good brush down with a toothbrush then rinse and air dry. ((http://www.hotrodders.com/forum/pinesol-really-does-clean-carburetors-amazingly-pics-inside-248810.html)) \\ See also [[techtalk:ref:tools127#general_cleaning_and_stuck_gaskets|Soaking parts]] in the REF section of the Sportsterpedia.
     * A 20 minute to up to a few days soak in a gallon of Gunk (or other) Carburetor Cleaner that has a basket inside for small parts and lowers in the can with a handle, rinse, air dry, use.
     * Soak it in mineral spirits for a few days. ((Monte03 of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/47937-cleaning-a-carb?t=185361))
     * You can use acrylic paint thinners for cleaning up carb parts. It melts the fuel varnish right off. ((russzx6 of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/47937-cleaning-a-carb?t=185361))
     * An aerosol spray carb cleaner will also work but may not loosen all of the build up in the jets or orifices in the carb body if they're not directly sprayed through. 
  * Blow out all holes, jets and orifices thoroughly with compressed air after cleaning.

A gallon of carburetor cleaner is very useful in cleaning out varnish from the channels and metering chamber. \\
It is especially useful for soaking stuck gaskets between parts and loosen the joint between them for dis-assembly. \\
Depending on how old or how 'stuck' the parts are, soaking for a couple hours may help to separate the old gasket in between. \\
Make sure to remove any rubber or plastic parts before soaking. Also check the label for safety precautions. \\
Parts that have been sitting for years may have to be soaked for about 24 hours or even days. \\
|  Carburetor Cleaner ((photo by Hippysmack))  ||
|{{techtalk:ref:genmsr:parts_cleaner_1_by_hippysmack.jpg?direct&300|}}|{{techtalk:ref:genmsr:parts_cleaner_2_by_hippysmack.jpg?direct&300|}}|

**Note**: \\
The use of wire to 'rod' out jets and orifices is discouraged in the FSM. \\
However, a hard wire such as a welding tip cleaner, has been known to open up stubborn areas at times. \\
Always use a wire smaller than the orifice cleaned so you don't widen the holes. \\
Doing so could create burrs or change the hole sizes. \\

**Carb Stand**: \\
  * You can put the carb in a vice to remove the screws, and for much of the following work. \\ Wrap in a shop towel; close the vice gently taking extra care with the choke and throttle linkages. \\ The vice is a needed extra pair of hands.
  * It can be very confusing trying to decide which way to bend the tang if it is not correct. \\ If the fuel level is low,Is the float high or low?, Do you need to bend the tang up or down? etc. \\ On the bench the carb is usually upside down, adding to the confusion. You should sort all this out before making an adjustments.

However, this setup works better than putting the carb directly into the vice. \\
The carb is set upright as 'in use' making adjustments more straight forward. \\
{{:techtalk:ref:tools:carb_stand_1_by_ironmick.jpg?direct&150|}} ((photo by IronMick of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/47937-cleaning-a-carb?t=185361)) 
{{:techtalk:ih:carb:bendix-zenith_carb_12_by_the_doctor71_of_the_xlforum.jpg?direct&200|}} 
((Pic courtesy of The Doctor71 of the XLFORUM)) \\

====== Related Service Bulletins ======
There are 5 known technical service bulletins related to Tillotson carbs. \\
[[techtalk:miscres:miscres05|Click Here]] to go to the Service Bulletin page in the Sportsterpedia.\\
You can scroll down to the following bulletins and click the "Y" next to each bulletin to download it. \\
  * TSB# 518 dated 9-10-1965 (Includes operation, adjustments, troubleshooting and servicing.)
  * TSB# 547 dated 10-24-1966 (Models produced after August 10, 1966 have a new carburetor inlet valve lever, needle and seat assembly.)
  * TSB# 564 dated 1-15-1968 (Instructions included for Adjusting, Diagnosing, Disassembly, Cleaning and Assembling). 
  * TSB# 571 dated 5-21-1968 (Tillotson carbs changed to incorporate a ball check valve in accelerating pump passage of plastic cover.)
  * TSB# 605 dated 11-28-1969 (Addresses shipments of defective needles with incorrectly formed blunt ends instead of tapered.) 

====== Welch Plug or Expansion Plug ======

  * Inspection: 
    * A close inspection around the walls of a welch plug can reveal possible leaks.
  * Removal: ((HD Service Bulletin #518 dated September 10, 1965 pg OC-189))
    * Whenever a welsh plug is removed, a new one should be installed in it's place, especially since a large part of the time, removal of one means destroying or deforming it.((1959-1969 HD Sportster FSM))
    * Drill an 1/8" hole thru it (just deep enough to break thru to the other side) off center and pry it out with a small punch. Be careful not to drill too deep which could destroy the nozzle assembly or casting. While prying it out, be careful not to damage the casting counter-bore edges around the plug.
    * You can also drill a small hole in it and use a small tap just big enough to start in the hole. ((snake173 of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/108002-zenith-bendix-carb-rebuild-kits/page3?postcount=1#post2687578)) \\ Thread the tap in the hole. \\ When it gets to the bottom of the passage, it will force the valve out with out damaging the bottom of carb passage. \\ Make sure to clean all the chips out to keep from plugging up passages later.  
  * Installation: ((HD Service Bulletin #518 dated September 10, 1965 pg OC-189))((1959-1969 HD Sportster FSM)). 
    * The plug should be seated  with a flat end punch that is slightly smaller than the diameter of the plug. The plug should be flat and not concaved to assure a tight fit. If leakage is suspected due to a rough or damaged welch plug seat in the casting, apply a small amount of epoxy or suitable sealant to the edges after installing it. 

Links to Welch plug sites: \\
  * [[https://www.hubbardspring.com/product-category/expansion-plugs/hubbard-expansion-plugs/|M.D. Hubbard Spring Co.]]

====== Diaphragm ======
The diaphragm for HD1 carbs is HD part# (27816-66). \\

{{:techtalk:ih:carb:1966-1971_sportster_tillotson_hd1_carb_diaphragm_27816-66_by_morlel32.jpg?direct&400|}} ((photo courtesy of C & M Sales, [[https://www.ebay.com/str/everythingmotorcycleparts?_trksid=p2047675.m3561.l2563|Link to Ebay Store]] ))
====== Links,Parts and Services for Tillotson Carbs ======
Original P/N for a Sporty Tillotson repair parts kit 27147-66 ((rivethog of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/92522-another-tillotson-magneto-hard-to-start-xlch-question/page2?t=757993&page=2)) \\
Original P/N for a Big Twin Tillotson repai parts kit 27137-66 \\

  * Parts list for Tillotson HD carbs:
      * [[http://tillotson.ie/wp-content/uploads/2015/07/HD-Series-1-Parts-List.pdf|HD Series 1 Parts List (PDF)]]
      * [[http://tillotson.ie/wp-content/uploads/2015/07/HD-Series-2-Parts-List.pdf|HD Series 2 Parts List (PDF)]]
      * {{ :pdf-bulletin:tillotson_carburetor_part_number_cross_reference.pdf |Tillotson Carburetor Part Number Cross Reference (PDF)}}
  * Service manual for Tillotson carbs:
      * [[http://tillotson.ie/wp-content/uploads/2016/03/Tillotson-HD-Series-Carburetor.pdf|Tillotson HD Series Carburetor (PDF)]]
  * Servicing for Tillotson carbs:
      * [[http://tillotson.ie/market/vintage/?filters=product_cat[repair-kits-parts]|Tillotson Company]].
      * [[https://www.eccarburetors.com/|EC Carburetors]]. 
      * [[http://thecarburetorshop.com/|The Carburetor Shop]].


|{{techtalk:ih:carb:tillotson_carb_repair_kit_by_the_doctor71_of_the_xlforum.jpg?direct&300|}}|
|Tillotson Carburetor repair/ refresh kit((Pic courtesy of The Doctor71 of the XLFORUM))|

====== Full Tillotson / HD Carb Part# Cross Reference Chart ======
Cross reference list between HD part#s and Tillotson part#s provided by sungod of the XLForum. \\

^{{techtalk:miscres:instruction_sheet_header_4.png?nolink&700|}}|||||||
|HD Part#|Tillotson Part#|Description| |HD Part#|Tillotson Part#|Description|
|711|04326|Welch Plug|:::|27705-61|08850|Nozzle|
|712|03489|Welch Plug|:::|27705-66|014049|Spring|
|713|013737|Welch Plug|:::|27705-66A|015253|Spring|
|1065W|08315|Screw & Lockwasher|:::|27706-57|010519|Spring|
|2545W|08942|Screw & Lockwasher|:::|27706-63|012823|Spring
|2546W|09066|Screw|:::|27706-66|013738|Spring|
|27119-74|HD-14lA|Carburetor|:::|27707-57|07824|Seal|
|27123-70R|HD-43A|Carburetor|:::|27707-66|013740|Seal|
|27132-66R|RK-723|Repair Kit|:::|27708-55|010444|Shaft|
|27133-66|GS-1HL|Gasket Kit|:::|27708-57|010844|Shaft|
|27134-66|RK-8HL|Repair Kit|:::|27708-66|013782|Shaft & Lever|
|27135-63|RK-572|Repair Kit|:::|27708-67|014297|Shaft & Lever|
|27135-66|RK-3HD|Repair Kit|:::|27709-55|08597|Clip|
|27135-66|RK-659|Repair Kit|:::|27710-55|010446|Lever & Swivel|
|27135-66|RK-660|Repair Kit|:::|27710-59|011691|Lever & Wire Connection|
|27137-66|RK-764|Repair Kit|:::|27711-55|010445|Lever|
|27138-63|GS-168|Gasket Set|:::|27712-55|03804|Washer|
|27138-66|GS-187|Gasket Set|:::|27712-66|013746|Washer|
|27138-66R|GS-204|Gasket Set|:::|27713-55|09067|Lever|
|27138-71|GS-223|Gasket Set|:::|27713-59|08490|Throttle Stop Lever|
|27139-66R|RK-771|Repair Kit|:::|27714-55|08646|Shutter|
|27140-71|RK-988|Repair Kit|:::|27714-61|012146|Shutter|
|27143-61|MD-119A|Carburetor|:::|27714-63|012283|Shutter|
|27144-59|MT-76A|Carburetor|:::|27714-66|013745|Shutter|
|27144-63|MD-l19B|Carburetor|:::|27715-55|010393|Connection|
|27145-55|MT-43A|Carburetor|:::|27715-59|011686|Choke & Wire Conn.|
|27145-55A|MT-43B|Carburetor|:::|27715-61|012328|Connection|
|27145-60|MT-82A|Carburetor|:::|27715-66|013534|Shutter|
|27150-71|HD-77A|Carburetor|:::|27715-67|014225|Connection|
|27150-7lA|HD-77B|Carburetor|:::|27716-55|010392|Washer|
|27152-66|HD-2D|Carburetor|:::|27716-61|012174|Washer|
|27152-66A|HD-1B|Carburetor|:::|27716-67|014294|Connection|
|27152-66B|HD-2D|Carburetor|:::|27717-59|05095|Screw|
|27154-66R|HD-5A|Carburetor|:::|27717-66|012177|Screw|
|27155-66|HD-1C|Carburetor|:::|27718-61|012334|Shaft & Lever|
|27155-66A|HD-1B|Carburetor|:::|27718-63|012806|Shaft & Lever|
|27155-66C|HD-ID|Carburetor|:::|27718-66|013777|Shaft & Lever|
|27158-63|HL-139A|Carburetor|:::|27718-67|014296|Shaft & Lever|
|27158-63|HL-139B|Carburetor|:::|27719-60|02672|Bushing|
|27158-63A|HL-212A|Carburetor|:::|27720-61|08942|Screw & Lockwasher|
|27158-67|HL-23lA|Carburetor|:::|27721-55|GS-106|Gasket Set|
|27249|012741|Washer|:::|27721-61|GS-116|Gasket Set|
|27273-63|012825|Lever|:::|27722-55|RK-164|Repair Kit|
|27274-67A|015594|Lever|:::|27722-59|RK-397|Repair Kit|
|27274-67|014266|Lever|:::|27722-60|RK-467|Repair Kit|
|27276-63|012826|Shaft & Lever|:::|27722-61|RK-472|Repair Kit|
|27276-66|014050|Shaft|:::|27725-61|09644|Shutter|
|27277-66R|014297|Shaft & Lever|:::|27726-61|09678|Clip|
|27295-66R|RK-697|Repair Kit|:::|27727-61|09780|Bushing|
|27317-63|012284|Jet (.043)|:::|27728-61|010079|Lever|
|27347-69|012392|Spring|:::|27729-61|012111|Clip|
|27352-66|013772|Mix. Screw|:::|27730-61|013618|Spring|
|27353-66|010511|Ring|:::|27730-63|012821|Shaft & Lever|
|27354-66|03114|Washer|:::|27730-66|014048|Shaft & Lever|
|27407-66|05322|Ball|:::|27730-67|014268|Choke Shaft Assem.|
|27411-67R|08304|Gasket|:::|27731-61|011072|Seal|
|27413-63|010165|Gasket|:::|27731-65|013507|Spring|
|27415-61|07903|Gasket|:::|27732-61|01974|Screw|
|27593-66|012956|Nut|:::|27732-63|010571|Screw|
|27595-66|015397|Fulcrum Pin|:::|27733-61|0992|Lockwasher|
|27596-66|013269|Screw|:::|27734-62|010911|Screen|
|27597-66|013774|Needle & Seat|:::|27735-61|06062|Screw & Lockwasher|
|27597-67|014853|Needle & Seat|:::|27736-65|07847|Washer|
|27598-66|013744|Gasket|:::|27740-61|012321|Mix. Screw|
|27599-66|013434|Spring|:::|27740-63|010513|Control Lever|
|27601-63|010529|Gasket|:::|27740-66|014020|Control Lever|
|27613-66|013406|Pinion Pin|:::|27740-70R|013589|Inlet Lever|
|27615-66|011394|Jet (.057)|:::|27742-61|012326|Spring|
|27616-66|011396|Jet (.061)|:::|27743-61|012327|Stop Screw|
|27617-66|011765|Jet (.053)|:::|27744-61|012332|Screw|
|27618-66|011722|Jet (.055)|:::|27745-66R|013855|Mix. Screw|
|27619-66|011395|Jet (.059)|:::|27746-66|010301|Screen|
|27619-66R|014313|Jet (.089)|:::|27747-66|010050|Cup|
|27620-66|011385|Jet (.063)|:::|27759-66|012761|Lever|
|27622-66|011764|Jet (.051)|:::|27760-63|010525|Pump Body|
|27624-66|011763|Jet (.049)|:::|27760-66|013785|Pump Assembly|
|27640-66|06076|Gasket|:::|27760-71|014992|Shaft and Lever|
|27643-71|014645|Pump Body|:::|27760-71A|015959|Shaft and Lever|
|27644-66|04920|Washer|:::|27761-63|012930|Gasket|
|27658-66|013789|Check Valve|:::|27775-74|08942|Screw & Lockwasher|
|27661-66|09484|Seal|:::|27804-63|014336|Diaphragm Cover|
|27667-71|015937|Lever Assembly|:::|27804-66|013772|Pump Body|
|27668-66|013742|Relief Valve|:::|27804-66A|014871|Pump Body|
|27669-66|013775|Spring|:::|27804-66R|014117|Diaphragm Cover|
|27670-55|05454|Friction Pin|:::|27805-63|010527|Strainer Cover|
|27671-66|08805|Spring|:::|27806-63|012473|Gasket|
|27672-55|09158|Shaft & Lever|:::|27806-66|013731|Gasket|
|27672-59|011692|Shaft & Lever|:::|27806-66R|014120|Gasket|
|27672-61|012330|Shaft & Lever|:::|27807-63|010098|Screw & Lockwasher|
|27672-63|012811|Shaft & Lever|:::|27808-63|010530|Strainer Screen|
|27673-55|05088|Shutter|:::|27809-63|012698|Diaphragm|
|27673-66|013741|Shutter|:::|27809-63A|014229|Pump Diaphragm|
|27674-63|012818|Shutter|:::|  |014230|Pump Diaphragm|
|27674-63A|09558|Shutter|:::|27810-63|011428|Washer|
|27674-66|014816|Shutter|:::|27811-63|011401|Packing|
|27675-55|08880|Gasket|:::|27812-63|02232|Plug Screw|
|27678-61|03311|Plug Screw|:::|27812-66|013771|Screw|
|27679-61|07896|Plug Screw|:::|27812-66R|014142|Screw|
|27680-55|012144|Float|:::|27813-63|011503|Spring|
|27680-61|011294|Float|:::|27814-66|010278|Screw & Lockwasher|
|27680-63|012813|Float|:::|27815-63|012084|Check Valve|
|27681-55|011564|Pin|:::|27816-63|012475|Diaphragm|
|27682-55|010471|Cover|:::|27816-66R|014248|Diaphragm|
|27683-55|08658|Gasket|:::|27816-66|013790|Diaphragm|
|27684-61|012616|Fuel Bowl|:::|27817-71|014248|Diaphragm|
|27685-61|011859|Pinion Screw|:::|27818-66|013094|Gasket|
|27688-55|08765|Mix. Screw|:::|27821-63|012370|Jet (.041)|
|27688-61|012318|Mix. Screw|:::|27819-63|014540|Jet (.037)|
|27688-63|011825|Mix. Screw|:::|27820-63|013266|Jet (.039)|
|27688-66|013787|Mix. Screw|:::|27822-63|012284|Jet (.043)|
|27688-71|015698|Mix. Screw|:::|27823-66R|011482|Jet (.081)|
|27689-55|08793|Spring|:::|27824-71|014348|Spring|
|27689-61|011103|Spring|:::|27825-71|014118|Clip|
|27690-61|06569|Gasket|:::|27826-71|014997|Nut|
|27691-55|09068|Spring|:::|27827-71|014998|Screw|
|27691-59|0788|Spring|:::|27828-71|014995|Clamp|
|27692-55|08875|Idle Tube|:::|27829-71|014999|Bracket|
|27692-60|011127|Idle Tube|:::|27830-71|013683|Gasket|
|27692-61|012320|Idle Tube|:::|27831-71|011516|Screen|
|27693-55|09120|Needle & Seat|:::|27832-71|014578|Check Valve|
|27693-59|011688|Needle & Seat|:::|27833-71|014993|Jet (.089)|
|27693-61|012325|Needle & Seat|:::|27833-74|016995|Jet (.0635)|
|27693-63|012339|Needle & Seat|:::|27834-71|013853|Gland|
|27693-66|014053|Needle & Seat|:::|27835-71|014247|Mixture Screw|
|27694-55|02510|Gasket|:::|27836-71|010079|Lever|
|27695-66R|013854|Mix. Screw|:::|27837-71|014647|Diaphragm|
|27696-63|010581|Screw|:::|27838-71|014646|Gasket|
|27696-66|013269|Screw|:::|27839-71|015219|Spring|
|27697-61|09112|Packing|:::|27840-71|015218|Screen|
|27697-66R|013853|Gland|:::|27841-71|015596|Needle & Seat|
|27698-61|0676|Gasket|:::|27842-71|013406|Pinion Pin|
|27699-55|010347|Mix. Screw|:::|27843-71|014239|Mixture Screw|
|27699-59|07972|Main Adj. Screw|:::|27844-71|014937|Strainer Cover|
|27700-55|0705|Packing|:::|27845-71|014644|Diaphragm|
|27700-61|0702|Gland|:::|27846-71|014643|Gasket|
|27700-63|012822|Screw|:::|27847-71|015455|Elbow Connector|
|27701-55|07282|Packing Nut|:::|27848-71|015941|Diaphragm Cover|
|27701-61|0703|Packing Nut|:::|27849-71|014120|Gasket|
|27702-55|09159|Nozzle|:::|27850-71|015010|Shutter|
|27702-60|09070|Nozzle|:::|27851-71|015052|Shaft|
|27703-55|06076|Gasket|:::|27852-71|014988|Screw & Lockwasher|
|27704-61|01102|Plug Screw|:::|27853-71|015384|Screw|
|27704-66|0675|Plug Screw|:::|27854-71|014687|Screw & Lockwasher|

----


\\

[[:techtalk:menu|{{:techtalk:gototechnicalmenu.jpg|}}]]
Trace: • REF: Tools - 120 • REF: Tools - 156 • IH: Suspension - Sub-03D • REF: Engine Mechanicals - Sub-05J • REF: Electrical System
Navigation

Search

Toolbox
