Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revision | |||
| techtalk:ih:oil02 [2025/10/18 05:07] – [1977-1980] hippysmack | techtalk:ih:oil02 [2025/10/18 06:10] (current) – [1977-1980] hippysmack | ||
|---|---|---|---|
| Line 28: | Line 28: | ||
| ==== 1977-1980 ==== | ==== 1977-1980 ==== | ||
| - | * 1977-1980 models use a fitting (34744-77) with a SAE 3/8" x 16 (x app. 7/16") bolt pattern that has a 1/4" hose nipple on the other end. | + | * 1977-1980 models use a fitting (34744-77) with a SAE 3/8" x 16 (x app. 7/16") bolt pattern that has a 3/16" hose nipple on the other end. |
| * Generally speaking, the rubber hose should run up under the seat and curl pointing down to keep any water from running down it. \\ If it has rotted or come loose from the fitting it can make a mess of that area. ((IronMick of the XLFORUM https:// | * Generally speaking, the rubber hose should run up under the seat and curl pointing down to keep any water from running down it. \\ If it has rotted or come loose from the fitting it can make a mess of that area. ((IronMick of the XLFORUM https:// | ||
| This will allow air to escape and oil to separate from the air and drop back down into the tranny compartment. | This will allow air to escape and oil to separate from the air and drop back down into the tranny compartment. | ||
