Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revisionNext revision | Previous revision | ||
| techtalk:ih:oil03h [2025/02/23 06:25] – [Using the 1983-1990 plate (26493-75A)] hippysmack | techtalk:ih:oil03h [2025/02/26 21:34] (current) – [Outer Plates and Shaft Seals] hippysmack | ||
|---|---|---|---|
| Line 4: | Line 4: | ||
| ====== Build Kits / Parts ====== | ====== Build Kits / Parts ====== | ||
| - | No build kit was ever assembled / sold from the factory according to the parts catalogs. So individual pieces were sold. \\ | ||
| - | You can search individual part numbers on the net for seals and gaskets. \\ | ||
| - | Or you can search for aftermarket parts / kits. | ||
| - | MAKE SURE THE SEALS MATCH YOUR PUMP when using aftermarket parts. | ||
| - | Current " | ||
| - | The " | ||
| - | If you have the older style pump, the L83-85 seal between the plates won't work on the earlier plate as it is pressed into it's matching plate. \\ | ||
| - | Or James Gaskets makes a seal kit (JGI-77-XL). | + | No build kit was ever assembled / sold from the factory according to the parts catalogs. So individual pieces were sold.\\ |
| + | You can search individual part numbers on the net for seals and gaskets.\\ | ||
| + | Or you can search for aftermarket parts / kits. MAKE SURE THE SEALS MATCH YOUR PUMP when using aftermarket parts. Current " | ||
| + | The " | ||
| + | If you have the older style pump, the L83-85 seal between the plates won't work on the earlier plate as it is pressed into it's matching plate. | ||
| + | |||
| + | Or James Gaskets makes a seal kit (JGI-77-XL). | ||
| * It appears to come with: | * It appears to come with: | ||
| - | | + | |
| - | * Pump cover O-ring | + | * Pump cover O-ring |
| - | * (2) separator plate seals (77-E83 and L83-85) | + | * (2) separator plate seals (77-E83 and L83-85) |
| - | * Both check valve O-rings | + | * Both check valve O-rings |
| - | * Retainer ring | + | * Retainer ring |
| - | * Pump housing pin | + | * Pump housing pin |
| ====== Outer Plates and Shaft Seals ====== | ====== Outer Plates and Shaft Seals ====== | ||
| Line 30: | Line 31: | ||
| Below are pics of the correct parts and part numbers. \\ | Below are pics of the correct parts and part numbers. \\ | ||
| |{{: | |{{: | ||
| + | \\ | ||
| + | The damage below was caused by using the wrong seal (83-90 seal with the metal shell) in the 77-82 outer plate with the counterbored seal hole. The plates (when installed) are very close together and the 83-90 seal doesn' | ||
| + | |||
| + | Pics by Billy1200 of the XLForum ((https:// | ||
| + | {{: | ||
| ===== Using the 1977-1982 outer separator plate (26493-75) ===== | ===== Using the 1977-1982 outer separator plate (26493-75) ===== | ||
| Line 61: | Line 67: | ||
| **Using a hydraulic press**: \\ | **Using a hydraulic press**: \\ | ||
| - | This method submitted by XLForum member, Fizzle, as an upgrade to his 1977 oil pump. \\ | + | This method |
| + | His goal was to glue the seal squarely in place using a retaining compound so it could not come loose, stick out of the plate and jam up the pump. \\ | ||
| I removed the protective blue paint from the seal with 91% iso alcohol, then scuffed the OD of the seal and the ID of the plate with 600 grit wet/dry sandpaper. I then thoroughly cleaned the two parts with 91% iso alcohol and applied a liberal amount of anaerobic retaining compound to each. I chose to use Eskonke brand from Amazon because it's way cheaper than Loctite, I could get it next day, and Eskonke provides a very useful application chart for their products. \\ | I removed the protective blue paint from the seal with 91% iso alcohol, then scuffed the OD of the seal and the ID of the plate with 600 grit wet/dry sandpaper. I then thoroughly cleaned the two parts with 91% iso alcohol and applied a liberal amount of anaerobic retaining compound to each. I chose to use Eskonke brand from Amazon because it's way cheaper than Loctite, I could get it next day, and Eskonke provides a very useful application chart for their products. \\ | ||
| {{: | {{: | ||
