Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
techtalk:ih:susp03 [2024/01/02 03:22] hippysmacktechtalk:ih:susp03 [2024/01/02 03:26] (current) hippysmack
Line 10: Line 10:
  
 ==== Removing the Swingarm ==== ==== Removing the Swingarm ====
-  * Follow the procedure in your FSM to remove the swingarm. However, if you can do it without removing the staked nut on the left side is best. It serves to center the swingarm in the frame and you can bung up the threads  on that nut really easily. ((GA_Ironhead http://xlforum.net/forums/showthread.php?t=185355))+  * Follow the procedure in your FSM to remove the swingarm. However, if you can do it without removing the staked nut on the left side is best. It serves to center the swingarm in the frame and you can bung up the threads  on that nut really easily. ((GA_Ironhead https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/47932-steering-head-swingarm-bearings-and-races?t=185355))
  
 ====== Swingarm Swaps ====== ====== Swingarm Swaps ======