L - Sportsterpedia

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== L ======

====== Lambda Sensor ======
Oxygen sensor that's placed inside the exhaust system to measure exhaust gas oxygen content
====== Lapping (Valves) ======
Process of de-carbonizing/ cleaning the valve faces and valve seats
====== LCD ======
Abbreviation for Liquid Crystal Display
===== Lean Angle =====

===== LED =====
Abbreviation for Light Emitting Diode
===== Lining (cylinders) =====
Process of inserting a steel cylinder insert into an aluminum alloy cylinder block  ((Haynes Sportster manual 1970-2010 pg REF*50))
===== LT =====
Low Tension. Describes the electrical circuit from the power supply to the primary side of the ignition coil. ((Haynes Sportster manual 1970-2010 pg REF*50)) 
===== Lubrication =====
The reduction of friction and wear using a friction-reducing layer. This layer can be liquid, solid or plastic.((http://www.oilspecifications.org/articles/lubrication-glossary.php))





----

\\
[[parts:partsplus-01g|{{:parts:gototerminologylist.jpg|}}]]
\\

Trace: • EVO: Electrical System - Sub-02A • REF: Tools - 163 • REF: Tools - 131 • L • REF: Tools - 117

Navigation

Search

Toolbox