Table of Contents
This is an old revision of the document!
REF: Body Parts
Aftermarket Handlebars, Risers and Mods
Risers
Riser Mods
| Done on a 2005 1200R Using 3/4“ sockets: a 1/2”x13 nut (3/4“ hex) was epoxied in each socket. The threads were then drilled out to 1/2”. 1) |
||
 |  |  |
1)
photos by thunderpaw of the XLFORUM http://xlforum.net/forums/showthread.php?postid=1239036
