Differences

This shows you the differences between two versions of the page.

--- techtalk:ref:elec11 [2023/06/20 18:06] – [Delphi] hippysmack
+++ techtalk:ref:elec11 [2024/01/13 21:51] (current) – hippysmack
@@ Line 3: / Line 3: @@
 \\
-====== Device Connectors - Useful Part#s and Cross References ======
+====== Device Connectors Compatibility ======
-\\
+Useful Part Numbers and Cross References (submitted by Andy56) ((Post#179 - https://www.xlforum.net/forum/forum-functions/sportsterpedia-com-admin/191119-send-a-note-to-sportsterpedia-admin?t=2039687))\\
 ====== Useful Videos/Tutorials ======
 AMP/Tyco Multilock Video Tutorial (parts 1&2) \\
@@ Line 21: / Line 22: @@
 ====== AMP/Tyco ======
+{{ :techtalk:ref:elec:connector_-_72035-71_by_1rosesofwood.jpg?direct&300|photo courtesy of Ebay seller,1rosesofwood}}
-^{{techtalk:miscres:instruction_sheet_header_4.png?nolink&600|}}||||
+^{{techtalk:miscres:instruction_sheet_header_4.png?nolink&650|}}||||
 |  AMP/Tyco Mate-N-Lok Terminals  ||||
 |HD Part#|Part Description|AMP/Tyco Part#||
@@ Line 76: / Line 78: @@
 ====== Deutsch ======
-^{{techtalk:miscres:instruction_sheet_header_4.png?nolink&600|}}||||
+^{{techtalk:miscres:instruction_sheet_header_4.png?nolink&650|}}||||
 |  Deutsch Terminals  ||||
 |HD Part#|Part Description|Deutsch Part#|Part Description|
@@ Line 117: / Line 119: @@
 ====== Molex ======
-^{{techtalk:miscres:instruction_sheet_header_4.png?nolink&600|}}||||
+^{{techtalk:miscres:instruction_sheet_header_4.png?nolink&650|}}||||
 |  Molex MX150 Terminals  ||||
 |HD Part#|Part Description|Molex Part#|Further Information|
@@ Line 155: / Line 157: @@
 ====== JAE Electronics ======
-^{{techtalk:miscres:instruction_sheet_header_4.png?nolink&600|}}||||
+^{{techtalk:miscres:instruction_sheet_header_4.png?nolink&650|}}||||
 |  JAE MX19 Terminals (Harley CAN BUS)  ||||
 |HD Part#|Part Description|JAE Part#||
@@ Line 167: / Line 169: @@
 |72907-11|Pin housing 4-way|MX19004P51|Receptacle|
-====== Miscellaneous Connectors ======
+====== Miscellaneous ======
+^{{techtalk:miscres:instruction_sheet_header_4.png?nolink&650|}}|||||
-===== AMP Superseal =====
-^{{techtalk:miscres:instruction_sheet_header_4.png?nolink&600|}}||||
-|Amp Terminals|Pin, 282465-1, 1.5mm wide|Socket, 282566-1, ||
-|HD Part#|Part Description|AMP Part#|Further Information|
-|72007-05|O2 Sensor Connector|282080-1|Female connector \\ Mating part 282104-1 Male|
-|72012-07|Active Exhaust \\ Sensor Connector|282089-1|Mating part 282107-1, Plug|
-===== Delphi =====
-^{{techtalk:miscres:instruction_sheet_header_4.png?nolink&600|}}|||||
 |Part Description|HD Part#|Amp Part#|Delphi Part#|Bosch Part#|
-|Speed Sensor Connector|72064-06|15336029-B|
+|Amp Terminals|Pin, 282465-1, \\ 1.5mm wide|Socket \\ 282566-1| | |
-|Coil, Fuel Pump & Idle \\ Speed Sensor Connector|72066-06|15354716-B|
+|O2 Sensor Connector|72007-05|282080-1|
+|:::|:::|Female connector. Mating part 282104-1 Male|||
+|Active Exhaust \\ Sensor Connector|72012-07|282089-1| | |
+|:::|:::|Mating part 282107-1, Plug||
+|Speed Sensor \\ Connector|72064-06|15336029-B|
+|Coil, Fuel Pump, \\ Idle Speed \\ Sensor Connector|72066-06|15354716-B|
 |Throttle Position \\ Sensor Connector|72065-06|13532244|
-|MAP Sensor Connector|72230-98|12129946-B|
+|MAP Sensor \\ Connector|72230-98|12129946-B|
-|Fuel Injector (95-05) \\ Socket Housing \\ Socket| \\ 72244-95 \\ 72326-95|  | \\ 12129142 \\ 12077939| EV1, 2 pin \\ connector|
+|Fuel Injector \\ Socket Housing \\ Socket \\ (95-05)| \\ 72244-95 \\ 72326-95|  | \\ 12129142 \\ 12077939| EV1, 2 pin \\ connector|
 |:::|Note: 72326-95 also used in some Harley fuse boxes as a \\ socket for mini fuses along with 72434-00 \\ (AMP.Tyco part number 282189-2)||||
 |Fuel Injector \\ Connector (06-up)|72098-06|15419715|
 |Intake Air Temp \\ Sensor Connector|72062-06|15336027-B|
+===== Ring and Spade Terminal Sizing =====
+^{{techtalk:miscres:instruction_sheet_header_4.png?nolink&650|}}||||||
+|Ring Terminals||||||
+|Hd Part#|Gauge|Fits|Hd Part#|Gauge|Fits|
+|9826|16-20g|5/16" stud|72254-94|14-16g|1/4" stud|
+|9840|12-14g|#10 stud (0.190")|72525-01|12-14g|3/8" stud \\ (serated form)|
+|9856|16-22g|#6 stud (0.138")|72532-02|  |3/8" stud|
+|9857|16-22g|#10 stud (0.190")|69200536|12-14g|  |
+|9858|16-20g|1/4" stud|
+|9859|16-22g|5/16" stud|
+|9860|16-22g|3/8" stud|
+|9861|16-22g|slotted to fit \\ #10 (0.190")|
+|9862|14-16g|#10 stud (0.190")|
+|9863|14-16g|1/4" stud|
+|9864|14-16g|5/16" stud|
+|9866|10-12g|#10 stud (0.190")|
+|9868|10-12g|5/16 stud|
+|9871|14-16g|#6 stud (0.138")|
+|9902|14-16g|#10 stud (0.190")|
+|9926|14-16g|5/16" stud|
+|9945|10-12g|5/16" stud|
+^{{techtalk:miscres:instruction_sheet_header_4.png?nolink&650|}}|||
+|Spade Terminals|||
+|Hd Part#|Gauge|Description|
+|9875|16-22g|5/16" female blade|
+|9904|16-20g|1/8" female blade|
+|9930|  |3/16" female blade|
+|9931|16-20g|3/16" female blade|
+|9914|  |1/4" female blade|
+|9918|14-16g|1/4" female blade|
+|9907|  |1/4" female blade, insulated|
+|9901|  |5/32" female flag|
+|9925|16-18g|1/4" female flag|
+|9852|  |1/4" male 45 degree|
+|9898|  |1/4" female flag insulated \\ (used on horn)|
+|71774-77|  |flag insulator|
+|70584-69|  |flag insulator|
+===== Circuit Breakers =====
+^{{techtalk:miscres:instruction_sheet_header_4.png?nolink&650|}}|||||
+|Circuit Breakers|||||
+|Hd Part#|Type|Amp|Standard part#s \\ (old, new)|Bussmann eqv part#s|
+|74589-73|Stud|15A|MC-CBR3, BR29|CBC15|
+|74599-77|Stud|30A|MC-CBR2, BR33|CBC30|
+|74600-94|Stud|50A|MC-CBR1, BR31|CBC50|
+|74600-97|Stud|40A|MC-CBR7, BR36|CBC40|
+|74586-70|Stud|30A|XX-XXXX, XXXX|CBC30B \\ (has mounting tags)|
+|74587-94|Blade|15 Amp|XX-XXXX, BR32|XXXXX|