REF: Engine Mechanicals - Sportsterpedia

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

[[:techtalk:menu|{{  :techtalk:gototechnicalmenu.jpg|}}]]
====== REF: Engine Mechanicals ======
====== Motor Mounts ======
  * [[techtalk:ref:engmech01t|DIY Front Left Motor Mount]]
====== Bottom End ======
  * [[techtalk:ref:engmech01p|Removing the Rivets on the Timing Inspection Cover]]

===== Timing Inspection Plugs and Drain Plugs =====

  * [[techtalk:ref:engmech01a|Timing Inspection Hole and Plug - Sealing and Thread Repair]]
  * [[techtalk:ref:engmech01d|Drain Plug Sealing and Temporary Fixes]]

===== General Thread Repair =====

  * [[techtalk:ref:engmech01e|Installing a Helicoil on a Drain Plug with the Engine in the Frame]] or otherwise drilling / tapping new threads in the case.
  * [[techtalk:ref:engmech01b|Timer Plate Mounting Hole Thread Repair]]

===== Engine Case =====

  * {{ :pdf:1929-1991_crankcase_ids.pdf |1929-1991 Belly Numbers (PDF)}}
  * [[techtalk:ref:engmech01s|Windage Tray / Flywheel Scraper]]

===== Crankshaft =====

  * [[techtalk:ref:engmech01r|Disassembling the Crankshaft / Flywheel Assembly]]

===== Flywheels =====

  * [[techtalk:ref:engmech01l|Making Your Own TDC Mark on the Flywheel]]
  * [[techtalk:ref:engmech01k|Catalog of Aftermarket Flywheels]]


===== Connecting Rods =====

  * [[techtalk:ref:engmech01c|Installing Wrist Pin Bushings in the Connecting Rod (Top Bushings)]]


===== Cams =====

  * [[techtalk:ref:engmech01f|Cam Overview - Advice]]
  * [[techtalk:ref:engmech01g|Cam Bushing Removal]]
  * [[techtalk:ref:engmech01i|Installing Inner Cam Bushings (in the gear case)]]
  * [[techtalk:ref:engmech01j|Installing Outer Cam Bushings (in the cam cover)]]
  * [[techtalk:ref:engmech01h|Clearancing for and Test Fitting Cams]]

===== Lifters =====

  * [[techtalk:ref:engmech01q|Lifter Comparisons]]


\\
[[:techtalk:menu|{{:techtalk:gototechnicalmenu.jpg|}}]]

Trace: • EVO: Specific Troubleshooting • IH: Carburetor, Intake Manifold & Exhaust • REF: Tools - 145 • REF: Tools - 110 • REF: Engine Control01 • IH: Engine Control - Sub-01B • REF: Engine Mechanicals • IH: Engine Mechanicals - Sub-01F