Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
techtalk:ref:engmech01n [2022/03/14 21:36] – [Gearcase Upper Oil Feed Galley] hippysmacktechtalk:ref:engmech01n [2022/03/14 22:36] (current) – [History] hippysmack
Line 2: Line 2:
 ====== REF: Engine Mechanicals - Sub-01N ====== ====== REF: Engine Mechanicals - Sub-01N ======
 ====== Cam Cover Gasket Compatibility ====== ====== Cam Cover Gasket Compatibility ======
-====== Ironhead Cam Cover Gaskets ====== +\\ 
-===== 1952-1976 K and Sportsters ===== +====== 1957-1985 Cam Cover Gaskets ====== 
-==== History ==== +===== History ===== 
 +**Gaskets**: \\
 **1952-1976 models** originally used OEM gasket 25224-52 until 1977 when the 25224-52A came out and replaced the -52 gasket back to 1952. \\ **1952-1976 models** originally used OEM gasket 25224-52 until 1977 when the 25224-52A came out and replaced the -52 gasket back to 1952. \\
 The -52 gasket has 2 holes in the top center (one for a mounting screw, the other for an oil passage from cover to upper feed galley in the case) \\ The -52 gasket has 2 holes in the top center (one for a mounting screw, the other for an oil passage from cover to upper feed galley in the case) \\
Line 23: Line 23:
 |  1957-E1982 (and some L1981) models \\ use cam cover gasket (25224-52A) ((photo courtesy of Ebay seller, inlinefabrication. [[https://www.ebay.com/str/inlinefabrication|Link to Ebay Store]] ))   |  1982-1985 (and some L1981) models \\ use cam cover gasket (25263-81) ((photo courtesy of c3cycle.com, Link to site: https://www.c3cycle.com/))  | |  1957-E1982 (and some L1981) models \\ use cam cover gasket (25224-52A) ((photo courtesy of Ebay seller, inlinefabrication. [[https://www.ebay.com/str/inlinefabrication|Link to Ebay Store]] ))   |  1982-1985 (and some L1981) models \\ use cam cover gasket (25263-81) ((photo courtesy of c3cycle.com, Link to site: https://www.c3cycle.com/))  |
 |{{:techtalk:ih:engmech:1972_xlch_gearcase_oil_galley_by_inlinefabrication.jpg?direct&300|}}|{{:techtalk:ih:engmech:1984l_xls_gearcase_oil_galley_by_c3-cycle-tech.jpg?direct&300|}}| |{{:techtalk:ih:engmech:1972_xlch_gearcase_oil_galley_by_inlinefabrication.jpg?direct&300|}}|{{:techtalk:ih:engmech:1984l_xls_gearcase_oil_galley_by_c3-cycle-tech.jpg?direct&300|}}|
 +
 +===== Gaskets =====
 +**Note**: \\
 +Make sure before using a NOS -52A gasket (on L1979-1981) engines that it has the long slanted slot. \\
 +
 +  * 1957-E1982 right cases with the small boss and __oil slot__ use gasket (25224-52A). \\ 57-E79 models can still use gasket 25224-52 with the hole in the upper center and these can be found online. \\ L79-81 models must use the 25224-52A gasket with the long slanted slot.
 +  * L1981-1985 right cases with the large boss and __horizontal oil hole__ use gasket (25263-81). \\ These models must use gasket 25263-81 with the long horizontal slot.
  
  

Trace: • REF: Oiling & Lubrication • REF: Engine Mechanicals - Sub-01N