Differences
This shows you the differences between two versions of the page.
| techtalk:ref:engmech01w [2020/10/27 00:26] – created hippysmack | techtalk:ref:engmech01w [2024/01/14 20:38] (current) – hippysmack | ||
|---|---|---|---|
| Line 7: | Line 7: | ||
| It seems aftermarket lifters have a tendency to be wide at the roller end (at the opposite pins holding the roller). \\ | It seems aftermarket lifters have a tendency to be wide at the roller end (at the opposite pins holding the roller). \\ | ||
| - | Measure them before installing to be sure they won't scratch the lifter bore when turned home. ((Hippysmack of the XLFORUM | + | Measure them before installing to be sure they won't scratch the lifter bore when turned home. ((Hippysmack of the XLFORUM |
| The Fueling lifters below had this problem. \\ | The Fueling lifters below had this problem. \\ | ||
| The company (when contacted) said they would replace them but with concerns of receiving the same issue with replacements, | The company (when contacted) said they would replace them but with concerns of receiving the same issue with replacements, | ||
