| Both sides previous revisionPrevious revision | |
| techtalk:ref:engmech05b [2019/07/16 15:59] – [Breather Vent Bypass in SE A/C] hippysmack | techtalk:ref:engmech05b [2023/12/21 17:01] (current) – hippysmack |
|---|
| These were cut in the straight section and connected the hoses there. \\ | These were cut in the straight section and connected the hoses there. \\ |
| The rubber pieces on the breather bolts are part of the Screamin Eagle air cleaner kit, part number 63520-04. \\ | The rubber pieces on the breather bolts are part of the Screamin Eagle air cleaner kit, part number 63520-04. \\ |
| Other parts can be bought at local auto parts stores. ((Pics by gravydog of the XLFORUM http://xlforum.net/forums/showthread.php?threadid=2039569)) \\ | Other parts can be bought at local auto parts stores. ((Pics by gravydog of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-intake-and-exhaust/sportster-motorcycle-air-intake-carburetor-efi-fuel-and-exhaust/191071-diy-crankcase-breather-with-screamin-eagle-ac?threadid=2039569)) \\ |
| |
| |{{techtalk:ref:engmech:crank_case_breather_1_by_gravydog.jpg?direct&300|}}|{{techtalk:ref:engmech:crank_case_breather_2_by_gravydog.jpg?direct&300|}}|{{techtalk:ref:engmech:crank_case_breather_3_by_gravydog.jpg?direct&300|}}| | |{{techtalk:ref:engmech:crank_case_breather_1_by_gravydog.jpg?direct&300|}}|{{techtalk:ref:engmech:crank_case_breather_2_by_gravydog.jpg?direct&300|}}|{{techtalk:ref:engmech:crank_case_breather_3_by_gravydog.jpg?direct&300|}}| |
| The plugged off hole in the backing plate were drilled out. \\ | The plugged off hole in the backing plate were drilled out. \\ |
| Both holes were drilled and JB Weld was used to fasten the 1/2" plastic tubing and form the barrel. \\ | Both holes were drilled and JB Weld was used to fasten the 1/2" plastic tubing and form the barrel. \\ |
| Left to cure and later paint. ((photos by Cookiey_Man of the XLFORUM http://xlforum.net/forums/showthread.php?t=47848)) \\ | Left to cure and later paint. ((photos by Cookiey_Man of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-intake-and-exhaust/sportster-motorcycle-air-intake-carburetor-efi-fuel-and-exhaust/28874-stock-air-cleaner-box-modifications?t=47848)) \\ |
| |{{techtalk:ref:engmech:breather_mod_1_by_cookiey_man.png?direct&300|}}|{{techtalk:ref:engmech:breather_mod_3_by_cookiey_man.png?direct&300|}}| | |{{techtalk:ref:engmech:breather_mod_1_by_cookiey_man.png?direct&300|}}|{{techtalk:ref:engmech:breather_mod_3_by_cookiey_man.png?direct&300|}}| |
| |
| The breathers are placed into the barrels. \\ | The breathers are placed into the barrels. \\ |
| You may have to remove some more material to ensure a snug fit in the barrel. \\ | You may have to remove some more material to ensure a snug fit in the barrel. \\ |
| There is a lip on the breather housing tube that should be removed also. ((photos by Cookiey_Man of the XLFORUM http://xlforum.net/forums/showthread.php?t=47848)) \\ | There is a lip on the breather housing tube that should be removed also. ((photos by Cookiey_Man of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-intake-and-exhaust/sportster-motorcycle-air-intake-carburetor-efi-fuel-and-exhaust/28874-stock-air-cleaner-box-modifications?t=47848)) \\ |
| |{{techtalk:ref:engmech:breather_mod_2_by_cookiey_man.png?direct&300|}}|{{techtalk:ref:engmech:breather_mod_4_by_cookiey_man.png?direct&300|}}|{{techtalk:ref:engmech:breather_mod_5_by_cookiey_man.png?direct&300|}}| | |{{techtalk:ref:engmech:breather_mod_2_by_cookiey_man.png?direct&300|}}|{{techtalk:ref:engmech:breather_mod_4_by_cookiey_man.png?direct&300|}}|{{techtalk:ref:engmech:breather_mod_5_by_cookiey_man.png?direct&300|}}| |
| |
| Banjo fittings and fiber washers. \\ | Banjo fittings and fiber washers. \\ |
| |
| |There are 3 holes for mounting the A/C & carb. \\ One on each head / one centered to the intake. ((photo by Hagen of the XLFORUM http://xlforum.net/forums/showthread.php?t=146084&page=11))|Drag Specialties relocation kit. ((photo by Hagen of the XLFORUM http://xlforum.net/forums/showthread.php?t=146084&page=11))| | |There are 3 holes for mounting the A/C & carb. \\ One on each head / one centered to the intake. ((photo by Hagen of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-intake-and-exhaust/sportster-motorcycle-air-intake-carburetor-efi-fuel-and-exhaust/44522-show-me-your-non-stock-breather-systems/page11?t=146084&page=11))|Drag Specialties relocation kit. ((photo by Hagen of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-intake-and-exhaust/sportster-motorcycle-air-intake-carburetor-efi-fuel-and-exhaust/44522-show-me-your-non-stock-breather-systems/page11?t=146084&page=11))| |
| |{{:techtalk:ref:engmech:breather_mod_3_by_hagen.jpg?direct&300|}}|{{:techtalk:ref:engmech:breather_mod_4_by_hagen.jpg?direct&300|}}| | |{{:techtalk:ref:engmech:breather_mod_3_by_hagen.jpg?direct&300|}}|{{:techtalk:ref:engmech:breather_mod_4_by_hagen.jpg?direct&300|}}| |
| |
| |
| |Bracket and breather bolts installed. ((photo by Hagen of the XLFORUM http://xlforum.net/forums/showthread.php?t=146084&page=11))|Hoses run down under the intake. ((photo by Hagen of the XLFORUM http://xlforum.net/forums/showthread.php?t=146084&page=11))|NRHS backing plate hiding the assembly. ((photo by Hagen of the XLFORUM http://xlforum.net/forums/showthread.php?t=146084&page=11))| | |Bracket and breather bolts installed. ((photo by Hagen of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-intake-and-exhaust/sportster-motorcycle-air-intake-carburetor-efi-fuel-and-exhaust/44522-show-me-your-non-stock-breather-systems/page11?t=146084&page=11))|Hoses run down under the intake. ((photo by Hagen of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-intake-and-exhaust/sportster-motorcycle-air-intake-carburetor-efi-fuel-and-exhaust/44522-show-me-your-non-stock-breather-systems/page11?t=146084&page=11))|NRHS backing plate hiding the assembly. ((photo by Hagen of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-intake-and-exhaust/sportster-motorcycle-air-intake-carburetor-efi-fuel-and-exhaust/44522-show-me-your-non-stock-breather-systems/page11?t=146084&page=11))| |
| |{{:techtalk:ref:engmech:breather_mod_5_by_hagen.jpg?direct&300|}}|{{:techtalk:ref:engmech:breather_mod_6_by_hagen.jpg?direct&300|}}|{{:techtalk:ref:engmech:breather_mod_7_by_hagen.jpg?direct&300|}}| | |{{:techtalk:ref:engmech:breather_mod_5_by_hagen.jpg?direct&300|}}|{{:techtalk:ref:engmech:breather_mod_6_by_hagen.jpg?direct&300|}}|{{:techtalk:ref:engmech:breather_mod_7_by_hagen.jpg?direct&300|}}| |
| |
