Differences

This shows you the differences between two versions of the page.

Link to this comparison view

-Both sides previous revisionPrevious revision
-techtalk:ref:engmech05f [2021/06/19 02:53]
– [Installing a Buell XB Rocker Box / Breather System on an Evo Sportster] hippysmack
+
+techtalk:ref:engmech05f [2023/12/21 21:27] (current)
hippysmack
@@ Line -3,5 +3,5 @@ removed created
 ====== Installing a Buell XB Rocker Box / Breather System on an Evo Sportster ======
 
 {{techtalk:ref:engmech:buell_xb_rocker_boxes-breathers_by_rubine.jpg?direct&300|}} ((photo by rubine of the XLFORUM httphttps://www.xlforum.net/forumsforum/showthread.phpbuell-motorcycle-forum/buell-motorcycle-top-end/25478-how-do-buell-heads-vent/page4?t=42202&highlight=buell&page=4)) \\
 
 Some have reported better engine breathing and less oil leaking out the breather valve by using these Buell rocker boxes. \\
@@ Line -37,10 +37,10 @@ removed created
 The rocker box mounted breather valves replace the OEM XL breather / umbrella valves. Vent lines off the breathers were tied together, into a catch can and to the rear of the bike. \\
 
 |Both breather valves are connected to a ‘Y’ connector that runs along the frame under the tank. ((photos by mick42 of the XLFORUM httphttps://www.xlforum.net/forumsforum/showthread.phpbuell-motorcycle-forum/buell-motorcycle-top-end/25478-how-do-buell-heads-vent/page4?pt=42202&highlight=buell&page=5762210#post57622104)) The tube \\ comes down into a catch can that can be emptied when it gets too much oil in it. On a long hard ride the \\ catch can will clean its self out.  ||
 |{{techtalk:ref:engmech:buell_rocker_box_and_breather_on_a_sporty_1_by_mick42.jpg?direct&300|}}| {{techtalk:ref:engmech:buell_rocker_box_and_breather_on_a_sporty_2_by_mick42.jpg?direct&300|}}|
 
 The tube from the catch can runs up under the fender and exits at the rear on the left side of the bike. When the bike is on the jiffy stand the hose is way over the side. \\
 If some oil drips from the end, it’s not near the tire and there is no oily mist spraying over all the bike while riding. \\
 |Oil from catch can on left side under fender. ((photo by mick42 of the XLFORUM httphttps://www.xlforum.net/forumsforum/showthread.php?p=5762210sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/frame-mount-evo-sportster-talk-1986-2003-models/197402-pcv-valve-in-sporty-rocker-covers#post5762210post4318378))| 
 |{{techtalk:ref:engmech:buell_rocker_box_and_breather_on_a_sporty_3_by_mick42.jpg?direct&250|}}|