Differences

This shows you the differences between two versions of the page.

--- techtalk:ref:priclutch02 [2024/01/19 23:38] – hippysmack
+++ techtalk:ref:priclutch02 [2024/01/21 05:00] (current) – [Upgrade Clutch Release Bearing - HD P/N 8885 to 7200B Angular Ball Bearing] ixl2relax
@@ Line 271: / Line 271: @@
 https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-drivetrain/sportster-motorcycle-transmission-clutch-primary-secondary-drive/157723-clutch-squeal-bad-throwout-bearing?t=1688139
-XLForum member 'Bikervation' has created a [[https://youtu.be/7BFSrilNk5Q|utube video]] of replacing this bearing. In it he uses a 17mm & 30mm socket to remove the old bearing and a 22mm socket to install the new bearing. Thease are used as presses, not socket wrenches during the procedure. You will benefit from viewing the actual process.
+XLForum member 'Bikervation' has created a [[https://youtu.be/7BFSrilNk5Q|utube video]] of replacing this bearing. In it he uses a 17mm & 30mm socket to remove the old bearing and a 22mm socket to install the new bearing. These are used for pressing, not as socket wrenches, during the procedure. You will benefit from viewing the actual process.