Differences

This shows you the differences between two versions of the page.

--- techtalk:ref:tools038 [2021/07/10 02:00] – [Press Fit Bushing in Bore Charts] hippysmack
+++ techtalk:ref:tools038 [2021/07/10 02:05] (current) – [Press Fit Bushing in Bore Charts] hippysmack
@@ Line 3: / Line 3: @@
 ====== Press Fit Bushing in Bore Charts ======
+The chart below was created with reference to a chart from All Industry Supplies ((https://www.aismn.com/products/drill-bushings/hole-preperation/)) \\
-|PRESS-FIT \\ BUSHING OD||RECOMMENDED \\ HOLE SIZE|PRESS-FIT \\ BUSHING OD||RECOMMENDED \\ HOLE SIZE|
+|  **SAE**  |||  **Metric**  |||
+|**PRESS-FIT \\ BUSHING OD**||**RECOMMENDED \\ HOLE SIZE**|**PRESS-FIT \\ BUSHING OD**||**RECOMMENDED \\ HOLE SIZE**|
 |NOMINAL|ACTUAL|:::|NOMINAL|ACTUAL|:::|
 |5/32"|.1578"-.1575"|.1565"-.1570"|3mm|3.020mm-3.014mm|3.000mm-3.010mm|