Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
techtalk:ref:tools101 [2022/03/23 20:12] – [Primary and Cam / Gearcase Cover Removal] hippysmacktechtalk:ref:tools101 [2022/03/23 21:14] (current) – hippysmack
Line 30: Line 30:
 This prompts some to change the screws out to modern hex (allen) head socket screws. \\ This prompts some to change the screws out to modern hex (allen) head socket screws. \\
 Even allen head screws won't take a lot of over-torque without distorting the drive slots in the head though. \\ Even allen head screws won't take a lot of over-torque without distorting the drive slots in the head though. \\
-For the most even tightening of any of these screws, you can use torque wrench with the correct bits. \\+For the most even tightening of any of these screws, you can use a torque wrench with the correct bits. \\
  
 You can find hex bits at hardware / tool stores that are either made to socket wrench adapters or made to insert into them. \\ You can find hex bits at hardware / tool stores that are either made to socket wrench adapters or made to insert into them. \\
Line 37: Line 37:
 The pic below shows a 0-80 in/lb torque wrench with adapters for a flat head screw. Just use the correct hex bit needed. \\ The pic below shows a 0-80 in/lb torque wrench with adapters for a flat head screw. Just use the correct hex bit needed. \\
  
-{{:techtalk:ref:tools:torque_wrench_with_hex_bit_adapter_by_hippysmack.jpg?direct&300|}} ((photo by Hippysmack)) \\+{{:techtalk:ref:tools:torque_wrench_with_hex_bit_adapters_by_hippysmack.jpg?direct&300|}} ((photo by Hippysmack)) \\
 ===== Primary Cover ===== ===== Primary Cover =====
- +\\
- +
 ===== Cam / Gearcase Cover ===== ===== Cam / Gearcase Cover =====
  

Trace: