Differences

This shows you the differences between two versions of the page.

--- techtalk:ref:tools162 [2019/04/08 17:12] – [Pushrod Tubes] hippysmack
+++ techtalk:ref:tools162 [2019/04/08 17:25] (current) – [91-Up] hippysmack
@@ Line 5: / Line 5: @@
 A standard Allen wrench can be used to remove or install the tube base bolts. \\
 But it won't help to properly torque the bolts on installation. \\
-A short Allen wrench adapter, short extension and a 3/8" socket wrench works well for removing / installing the bolts. ((photo by Hippysmack)) \\
+A short Allen wrench adapter, short extension and a 3/8" socket wrench works well for removing / installing the bolts. \\
-The extension brings the wrench to the smaller ID area of the tube.
+|The short Allen adapter and extension brings the wrench to the smaller OD area of the tube. \\ A beam type torque wrench with a small head will then work for proper torque on the bolts. ((photos by Hippysmack))||
-|{{:techtalk:ref:tools:pushrod_tubes_2_by_hippysmack.jpg?direct&300|}}|
+|{{:techtalk:ref:tools:pushrod_tubes_2_by_hippysmack.jpg?direct&300|}}|{{:techtalk:ref:tools:pushrod_tubes_16_by_hippysmack.jpg?direct&300|}}|