Differences

This shows you the differences between two versions of the page.

--- techtalk:ref:transfinal01a [2023/01/25 07:23] – [REF: Gears, Sprockets, Belts - 01A] ixl2relax
+++ techtalk:ref:transfinal01a [2023/01/25 07:33] (current) – [Parts] ixl2relax
@@ Line 13: / Line 13: @@
 ===== Parts =====
-I found multiple used rear pulleys on eBay under $50 got a used but perfect 128 tooth belt for $65 got the belt guard for $35. Only bought a new VTwin front pulley for $85.\\
+I found multiple used rear pulleys on eBay under $50. I got a used but perfect 128 tooth belt for $65.\\
+I got the belt guard for $35. Only bought a new VTwin front pulley for $85.\\
 {{:techtalk:ref:transfinal:dave76-cn-blt-03.jpg?400|image1}}
@@ Line 19: / Line 20: @@
 {{:techtalk:ref:transfinal:dave76-cn-blt-04.jpg?400|image1}}
-A standard 1991 Belt Drive Sprocket Cover will be needed, the left middle bolt is no longer used so I just used a short faux bolt and nut.
+A standard 1991 Belt Drive Sprocket Cover will be needed. The left middle bolt will not be used so I just placed a short faux bolt and nut there.
 The Belt I used was 1-1/8" wide with 128 teeth. This puts the axle adjuster in the middle of the range.