Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
techtalk:ref:transfinal01a [2023/01/25 07:32] – [Parts] ixl2relaxtechtalk:ref:transfinal01a [2023/01/25 07:33] (current) – [Parts] ixl2relax
Line 20: Line 20:
 {{:techtalk:ref:transfinal:dave76-cn-blt-04.jpg?400|image1}} {{:techtalk:ref:transfinal:dave76-cn-blt-04.jpg?400|image1}}
  
-A standard 1991 Belt Drive Sprocket Cover will be needed, the left middle bolt is no longer used so I just used a short faux bolt and nut.+A standard 1991 Belt Drive Sprocket Cover will be needed. The left middle bolt will not be used so I just placed a short faux bolt and nut there.
  
 The Belt I used was 1-1/8" wide with 128 teeth. This puts the axle adjuster in the middle of the range. The Belt I used was 1-1/8" wide with 128 teeth. This puts the axle adjuster in the middle of the range.

Trace: • EVO: Engine Control - Sub-03b • REF: Gears, Sprockets, Belts - Sub-01A • REF: Tools - 108 • REF: Engine Mechanicals - Sub-02A • EVO: Engine Control