REF: Wheels, Brakes & Tires

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
[[:techtalk:menu|{{  :techtalk:gototechnicalmenu.jpg|}}]]
====== REF: Wheels, Brakes & Tires ======

\\ 


====== Axle/Bearing Spacers - Miscellaneous Info ======

Outer Spacer Widths - From 'fergerburger' at this XLForum Thread:
http://xlforum.net/forums/showthread.php?t=1681432

| Outer Spacers For 3/4" Axles ||
^ Width ^ P/N |
| .300" | 43548-74 Stepped spacer |
| .380" | 43358-83A |
| .440" | 43548-73 stepped spacer |
| .465" | 43488-77 Stepped spacer |
| .506" | 41607-83 |
| .653" | 41594-73 |
| .750" | 43654-86A |
| .930" | 43617-95 - Speedo Drive Width (84-94)|
| 1.00" | 43657-89 |
| 1.165" | 41591-81 |
| 1.245" | 40915-94 |
| 1.250" | 40910-84A |
| 1.340" | 43683-97 |
| 1.420" | 43674-95 |

| For 1" Axles ||
^ Width ^ P/N |
| .470" | 43654-00 |
| .515" | 43617-00 |
| .887" | 40910-00 |
| .986" | 43683-00 |
| 1.880" | 41595-00 |


^  Preston Cycle Products - Chrome Axle Spacers((http://www.prestoncycle.com/ImageRepository/2015%20CA%20Web%20Catalogue/13A-CA%20Tires%20and%20Wheels.pdf))  |||| 
| HD P/N    |   ID    |  Length |   PCP# |
| 41591-81  |  0.710  |  1.265  |  43016 |
| 40915-94  |  0.720  |  1.253  |  43003 |
| 43657-89  |  0.725  |  1.030  |  43018 |
| 43674-95  |  0.725  |  1.412  |  43004 |
| 43683-97  |  0.730  |  1.350  |  43005 |
| 41607-83  |  0.735  |  0.510  |  43014 |
| 43648-86  |  0.735  |  1.370  |  43017 |
| 40910-00  |  0.740  |  0.900  |  43019 |
| 43683-00  |  0.740  |  0.990  |  43021 |
| 41591-90  |  0.740  |  1.435  |  43006 |
| 41595-86  |  0.745  |  0.123  |  43013 |
| 47517-58  |  0.745  |  0.380  |  43015 |
| 41594-73  |  0.745  |  0.655  |  43010 |
| 41592-79  |  0.745  |  1.210  |  43012 |
| 43358-83A  |  0.750  |  0.370  |  43009 |
| 43654-00  |  0.750  |  0.470  |  43022 |
| 43617-00  |  0.750  |  0.520  |  43023 |
| 43654-86A  |  0.750  |  0.750  |  43007 |
| 41595-73  |  0.750  |  0.830  |  43011 |
| 43617-95  |  0.750  |  0.930  |  43002 |
| 40910-84A  |  0.750  |  1.255  |  43008 |
| 41595-00  |  0.750  |  1.980  |  43020 |
| 43613-00  |  0.755  |  3.040  |  43026* |
| 43608-00  |  0.755  |  4.810  |  43025* |
| 43517-00  |  1.000  |  4.810  |  43024* |
|  * Hub Spacers - Not Chromed ||||

^  ColonyMachine.com((http://www.colonymachine.com/ColonyCatalog2018.pdf))  |||||
| HD Equiv# |  Axle  |  OD  |  ID  |  Length/Width  |
| 43358-08 |  25mm  |  1.470 |  25mm |  .317 |
| 43522-08 |  25mm  |  1.480 |  25mm |  .648 |

\\

====== 1979 Front Wheel Parts - All Models ======

    * Brake disc installation screws x (10) - (3680) - 5/16"-18 x 7/8" socket head cap bolts((1979 Harley Davidson XLH/XLCH/XLS-1000 Parts Catalog))
    * Wheel bearings (2) roller type (9052)((1979 Harley Davidson XLH/XLCH/XLS-1000 Parts Catalog))
    * Spacer (1) (inside) between the bearings((1979 Harley Davidson XLH/XLCH/XLS-1000 Parts Catalog))
      * 2.564" violet (43623-78)
      * 2.550  pink (43624-78)
      * 2.536  gold (43625-78)
    * Spacer  (1) (outside) left bearing (43488-77)((1979 Harley Davidson XLH/XLCH/XLS-1000 Parts Catalog))
    * Hub seals (2) - (47519-72)((1979 Harley Davidson XLH/XLCH/XLS-1000 Parts Catalog))
    * Axle bolt 3/4" shank with 5/8"x 18 threads  (43883-77) ((1979 Harley Davidson XLH/XLCH/XLS-1000 Parts Catalog)) 
      * Washer 5/8" x 1 5/16" x 3/32" (6653)
      * Lock washer 5/8" (7022)
      * Nut 5/8" x 18 (10) (7813) - 15/16" hex head
    * Wheel weight 1/2 oz (95590-77)
    * Wheel weight 1 oz (95591-77)    
    * Brake rotor ((1979 Harley Davidson XLH/XLCH/XLS-1000 Parts Catalog))
      * Early '79 XL, XLCH (2) (44137-77)
      * Late '79 XL, XLCH, XLS(2) (44137-79)


\\

====== 1979 Rear Wheel Parts - All Models ======
  * Sprocket to wheel mounting bolts (5) - (3769) 7/16" x 14 x 1-1/2" with (7039) 7/16" lock-washers.  
  * Rear sprocket: 
    * (41470-73A) Shot blast and chrome.
    * (41470-78) Polish and chrome.
  * Inner retaining ring (2) - (11027)
  * Bearing spacer washer (2) - (43559-73)
  * Bearing spacer (outer right, 1-1/2") (41203-79)
  * Bearing seal (to hub)(2) - (47519-72)
  * Roller bearing (2) - (9052)
  * Bearing spacer (outer left, 1") (41202-79)
  * Disc brake (41791-79)
  * Disc brake screw (5) - (43567-79)
  * Axle bolt 3/4" shank threaded for 5/8" on the end with, (6655) 5/8" x 1-1/2" x 1/8" washer, (7022) 5/8" lock-washer and (7986) 5/16" x 18 x 1-1/2 hex head nut.
  * Wheel weight 1/2 oz (95590-77)
  * Wheel weight 1 oz (95591-77) 

\\
\\


====== Homemade Axle Adjuster End Plate ======

If you break an adjuster end plate while your out riding, here is quick fix that might help get you home. Click on a pic to enlarge:

|{{techtalk:ref:wheels:homemade_axle_adjuster_endplate_1_by_welshturk.jpg?direct&300|}}|{{techtalk:ref:wheels:homemade_axle_adjuster_endplate_2_by_welshturk.jpg?direct&300|}}|{{techtalk:ref:wheels:homemade_axle_adjuster_endplate_3_by_welshturk.jpg?direct&300|}}|
|One large fender washer with a smaller one in front to keep the large one from bending. ((photos by welshturk of the XLFORUM http://xlforum.net/forums/showthread.php?t=1935064&highlight=axle))|||


[[:techtalk:menu|{{:techtalk:gototechnicalmenu.jpg|}}]]
Trace: • REF: Tools & Fasteners • IH: Engine Control - Sub-02A • REF: Tools - 145 • REF: Tools - 147 • IH: Engine Control - Sub-01C • EVO: Engine Mechanicals - Sub-01F