Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revisionNext revision | Previous revision | ||
| techtalk:ih:wheels02t [2025/09/16 02:42] – [1974-1977 Front Brake Pad Replacement] hippysmack | techtalk:ih:wheels02t [2025/09/16 03:17] (current) – [Removing the Brake Pads and Rivets] hippysmack | ||
|---|---|---|---|
| Line 3: | Line 3: | ||
| \\ | \\ | ||
| ====== 1974-1977 Front Brake Pad Replacement | ====== 1974-1977 Front Brake Pad Replacement | ||
| + | Follow the Factory Service Manual when working on the brake system. \\ | ||
| + | |||
| The 74-77 pie slice caliper uses pads that are riveted to the backing plates. \\ | The 74-77 pie slice caliper uses pads that are riveted to the backing plates. \\ | ||
| Changing the brake pads means removing the rivets and pads and installing new rivets to hold the new pads. \\ | Changing the brake pads means removing the rivets and pads and installing new rivets to hold the new pads. \\ | ||
| Line 14: | Line 16: | ||
| ====== Removing the Brake Pads and Rivets ====== | ====== Removing the Brake Pads and Rivets ====== | ||
| - | The pads should be replaced as a set so you'll need to drill out all 8 rivets using a 9/64" drill bit to remove the old pads. \\ | + | The pads should be replaced as a set so you'll need to drill out the rivets using a 9/64" drill bit to remove the old pads. \\ |
| ====== Installing the Brake Pads and Rivets ====== | ====== Installing the Brake Pads and Rivets ====== | ||
| - | There are several ways to replace the pads. The rebuild kit contains the pads and rivets needed. \\ | + | There are several ways to replace the pads. The rebuild kit contains the pads and hollow |
| * One way is to take them to an auto brake shop that does it's own riveting and/or bonding and have the pad riveted or even bonded to the backing plates. ((Hopper of the XLFORUM https:// | * One way is to take them to an auto brake shop that does it's own riveting and/or bonding and have the pad riveted or even bonded to the backing plates. ((Hopper of the XLFORUM https:// | ||
| * If you want to replace the pads yourself, it's best to have the right tools to install the rivets so you don't split the rivets. | * If you want to replace the pads yourself, it's best to have the right tools to install the rivets so you don't split the rivets. | ||
