| Both sides previous revisionPrevious revision | |
| techtalk:ref:body30c [2024/01/09 17:39] – hippysmack | techtalk:ref:body30c [2024/01/09 20:32] (current) – hippysmack |
|---|
| |
| Shift side should be no problem. Brake side would require some work. | Shift side should be no problem. Brake side would require some work. |
| <blockquote>When I looked at an 86 to 03 custom Sportster it occurred to me that I could make the forwards work on my 1980. ((IronMick of the XLFORUM http://xlforum.net/forums/showthread.php?t=717997)) \\ | <blockquote>When I looked at an 86 to 03 custom Sportster it occurred to me that I could make the forwards work on my 1980. ((IronMick of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/89445-86-to-03-hd-forward-controls-modified-to-fit-1980?t=717997)) \\ |
| It was looking at the brake side that convinced me - the way they fit between the case and the exhaust. \\ | It was looking at the brake side that convinced me - the way they fit between the case and the exhaust. \\ |
| (and the similar rear brake master cylinder) \\ | (and the similar rear brake master cylinder) \\ |
| </blockquote> | </blockquote> |
| |
| |Left side assembly ((photo by IronMick of the XLFORUM® ((http://xlforum.net/forums/showthread.php?t=717997))|Right side Assembly ((photo by IronMick of the XLFORUM® ((http://xlforum.net/forums/showthread.php?t=717997))| | |Left side assembly ((photo by IronMick of the XLFORUM® https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/89445-86-to-03-hd-forward-controls-modified-to-fit-1980?t=717997))|Right side Assembly ((photo by IronMick of the XLFORUM® https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/89445-86-to-03-hd-forward-controls-modified-to-fit-1980?t=717997))| |
| |{{:techtalk:ref:body:forward_mods_14_by_ironmick.jpg?direct&300|}}|{{:techtalk:ref:body:forward_mods_13_by_ironmick.jpg?direct&300|}}| | |{{:techtalk:ref:body:forward_mods_14_by_ironmick.jpg?direct&300|}}|{{:techtalk:ref:body:forward_mods_13_by_ironmick.jpg?direct&300|}}| |
| |
| * E-clip | * E-clip |
| |
| | Motor mounts and parts. ((photos by IronMick of the XLFORUM http://xlforum.net/forums/showthread.php?t=717997)) || | | Motor mounts and parts. ((photos by IronMick of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/89445-86-to-03-hd-forward-controls-modified-to-fit-1980?t=717997)) || |
| |{{:techtalk:ref:body:forward_mods_15_by_ironmick.jpg?direct&300|}}|{{:techtalk:ref:body:forward_mods_16_by_ironmick.jpg?direct&300|}}| | |{{:techtalk:ref:body:forward_mods_15_by_ironmick.jpg?direct&300|}}|{{:techtalk:ref:body:forward_mods_16_by_ironmick.jpg?direct&300|}}| |
| |
| Template for lower front motor mount hole to be drilled: \\ | Template for lower front motor mount hole to be drilled: \\ |
| {{:techtalk:ref:body:forward_mods_25_by_ironmick.jpg?direct&300|}} ((drawing by IronMick of the XLFORUM http://xlforum.net/forums/showthread.php?t=717997)) | {{:techtalk:ref:body:forward_mods_25_by_ironmick.jpg?direct&300|}} ((drawing by IronMick of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/89445-86-to-03-hd-forward-controls-modified-to-fit-1980?t=717997)) |
| |
| <blockquote>To restore the strength lost by drilling the hole, the largest 1" ID steel washer that would not be too large OD was used. \\ | <blockquote>To restore the strength lost by drilling the hole, the largest 1" ID steel washer that would not be too large OD was used. \\ |
| It might be a good idea to fabricate a mount from thick cardboard, cut the hole, and check to see if it is good. \\ | It might be a good idea to fabricate a mount from thick cardboard, cut the hole, and check to see if it is good. \\ |
| |
| |Right side spacer (partly hidden by oil line) ((photo by IronMick of the XLFORUM http://xlforum.net/forums/showthread.php?t=717997))|Right side nut and E-clip ((photo by IronMick of the XLFORUM http://xlforum.net/forums/showthread.php?t=717997))| | |Right side spacer (partly hidden by oil line) ((photo by IronMick of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/89445-86-to-03-hd-forward-controls-modified-to-fit-1980?t=717997))|Right side nut and E-clip ((photo by IronMick of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/89445-86-to-03-hd-forward-controls-modified-to-fit-1980?t=717997))| |
| |{{:techtalk:ref:body:forward_mods_17_by_ironmick.jpg?direct&300|}}|{{:techtalk:ref:body:forward_mods_18_by_ironmick.jpg?direct&200|}}| | |{{:techtalk:ref:body:forward_mods_17_by_ironmick.jpg?direct&300|}}|{{:techtalk:ref:body:forward_mods_18_by_ironmick.jpg?direct&200|}}| |
| |
| And it would allow a close fit of the E-clip. More precision measuring. \\ | And it would allow a close fit of the E-clip. More precision measuring. \\ |
| |
| | Left side nut and E-clip. ((photos by IronMick of the XLFORUM http://xlforum.net/forums/showthread.php?t=717997)) || | | Left side nut and E-clip. ((photos by IronMick of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/89445-86-to-03-hd-forward-controls-modified-to-fit-1980?t=717997)) || |
| |{{:techtalk:ref:body:forward_mods_19_by_ironmick.jpg?direct&300|}}|{{:techtalk:ref:body:forward_mods_20_by_ironmick.jpg?direct&200|}}| | |{{:techtalk:ref:body:forward_mods_19_by_ironmick.jpg?direct&300|}}|{{:techtalk:ref:body:forward_mods_20_by_ironmick.jpg?direct&200|}}| |
| |
| You can / could order them from the Cycle Shack website. \\ | You can / could order them from the Cycle Shack website. \\ |
| |
| | Rear Brake Stop for mid-controls. ((photos by IronMick of the XLFORUM http://xlforum.net/forums/showthread.php?t=717997)) || | | Rear Brake Stop for mid-controls. ((photos by IronMick of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/89445-86-to-03-hd-forward-controls-modified-to-fit-1980?t=717997)) || |
| |{{:techtalk:ref:body:forward_mods_21_by_ironmick.jpg?direct&300|}}|{{:techtalk:ref:body:forward_mods_22_by_ironmick.jpg?direct&300|}}| | |{{:techtalk:ref:body:forward_mods_21_by_ironmick.jpg?direct&300|}}|{{:techtalk:ref:body:forward_mods_22_by_ironmick.jpg?direct&300|}}| |
| |
| It also is easier to repair as it uses a one-piece kit. There have been lots of these on eBay in the past. | It also is easier to repair as it uses a one-piece kit. There have been lots of these on eBay in the past. |
| |
| With 86 to 03 forwards, the master cylinder stays in the stock location on the sprocket cover. ((IronMick of the XLFORUM http://xlforum.net/forums/showthread.php?p=2871067&highlight=forwards#post2871067)) \\ | With 86 to 03 forwards, the master cylinder stays in the stock location on the sprocket cover. ((IronMick of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/93684-just-a-update-on-my-79-project-opinion-poll-pics/page2?highlight=forwards#post2167215)) \\ |
| The M/C pic below was taken before realizing that the fluted connection would not work. \\ | The M/C pic below was taken before realizing that the fluted connection would not work. \\ |
| Later a brake line was fabricated with a banjo fitting for this. ((photos by IronMick of the XLFORUM http://xlforum.net/forums/showthread.php?t=717997)) \\ | Later a brake line was fabricated with a banjo fitting for this. ((photos by IronMick of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/89445-86-to-03-hd-forward-controls-modified-to-fit-1980?t=717997)) \\ |
| |
| |Brake stop band-aid. ((photo by IronMick of the XLFORUM http://xlforum.net/forums/showthread.php?t=717997)) |Newer rear brake master cylinder. ((photo by IronMick of the XLFORUM http://xlforum.net/forums/showthread.php?t=717997))| | |Brake stop band-aid. ((photo by IronMick of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/89445-86-to-03-hd-forward-controls-modified-to-fit-1980?t=717997)) |Newer rear brake master cylinder. ((photo by IronMick of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/89445-86-to-03-hd-forward-controls-modified-to-fit-1980?t=717997))| |
| |{{:techtalk:ref:body:forward_mods_23_by_ironmick.jpg?direct&300|}}|{{:techtalk:ref:body:forward_mods_24_by_ironmick.jpg?direct&300|}}| | |{{:techtalk:ref:body:forward_mods_23_by_ironmick.jpg?direct&300|}}|{{:techtalk:ref:body:forward_mods_24_by_ironmick.jpg?direct&300|}}| |
| |
