Table of Contents
This is an old revision of the document!
REF: Oiling & Lubrication
Sportster Oil Pump Comparisons
Comparing 77-85, 98-06 and 07 and up Pumps
A 1-1/2“ hole was cut into an aluminum plate with 4 holes tapped to mount the pump.
Both the 79 and 98 pumps were bolted to and outlined on the aluminum sheet. 1)
 |  |  |
The mounting surfaces are compared below.
The red circle indicates the projected oil entry hole in 77-90 engine cases.
The last pic is a projected lineal of 3/16” from the outside upper edge of the 98 style pump to the center of the entry hole in the case. 2)
 |  |  |
 |
 |  |  |
 |  |  |
 |  |
 |  |
1)
photos by Hippysmack of the XLFORUM http://xlforum.net/forums/showthread.php?t=2071153&page=6
2)
photos by Hippysmack
